Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateFast, Reliable Garage Door Installation Across Kent
If your garage door has finally given out, we install new doors for homeowners all over Kent, from the Panther Lake acreage properties to the two-car garages on East Hill. Nobody should have to park in the driveway while waiting on a callback that never comes. Call (866) 937-7471 and we’ll get a free measure and a written price on the calendar. We know Kent’s older ranch housing and its long service drives, so we arrive already expecting a heavier door, a tired spring, and a worn track. That local familiarity is what keeps a big job to a single visit.

Why Kent Homeowners Call South Hill Garage Door Repair for Garage Door Installation
South Hill Garage Door Repair stays busy in Kent because we show up, quote the work in writing, and don’t push a replacement when a repair will do. Our technicians have up to 8 years of experience installing and servicing doors of every make and model, and they know the difference between a door that’s tired and one that’s finished. We’re a multi-brand specialist, familiar with LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor doors and openers, which means we diagnose faster and source the right parts instead of guessing. That matters most on Kent’s acreage lots, where a heavy custom door and an oversized shop opener leave little room for error.
Our reputation in Kent is built on straightforward work: the price we quote is the price you pay, agreed before we touch a hinge. We understand that a garage door is a daily-use, high-visibility part of a home. When it fails, you feel it the next morning. So we treat installations like the serious job they are, measure everything twice, and get the door hung, balanced, and running smooth before we leave.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Our Garage Door Installation Services in Kent
New Door Installation
A full new door installation in Kent is a chance to fix what the old door kept getting wrong. We measure the opening, check the slab for movement, and match the door to how you actually use the garage. Whether that’s a standard single door off a valley ranch or a wide door on a shop outbuilding, we measure once and order right the first time. If you’re comparing options, our garage door installation team can walk you through materials and lift styles that hold up here.
Single Car Door
Most Kent homes built from the 1950s through the 1970s have an attached single-car garage, and many still carry the original section door. A new single door is the straightforward fix when the panels are swollen and the track is out of alignment. We set the springs for the door’s actual weight, not a generic rating, so it lifts easy and lasts.
Double Car Door
Newer builds on the East Hill and the valley edges often have vinyl-sided two-car garages with steel doors from the 1990s and 2000s. Those doors are heavy, and a worn torsion spring will sag under the load. We install double car doors and set them up with a high-cycle spring and sealed bearings so the door doesn’t fight the opener. A double door done right is quiet, balanced, and runs true for years.
Custom Garage Door
Kent has plenty of properties with detached workshops and oversized openings, and a stock door won’t fit or carry the weight. We install custom doors in wood and steel sized to the opening, with torsion springs rated for the extra mass. A custom door that’s built for the load runs smooth, and the opener doesn’t strain every time you pull in.
Trusted Brands We Service in Kent
We service and install the brands you’ll find on homes across Kent: LiftMaster, Chamberlain, Genie, Clopay, and the other major makes. Being brand-familiar means we know how a Chamberlain opener’s logic board behaves, how a Clopay steel panel is formed, and how a Genie rail sits against an older door frame. We don’t pretend to stock parts, but we know where to source them fast, and we don’t stall on an install waiting on a guess. Turnaround stays tight because the technician already knows the product.
See the difference
Before
After
Before
After
Before
AfterCommon Garage Door Installation Problems We See in Kent Homes
Here’s the thing about Kent’s housing and its weather. The Green River Valley traps damp air, and the older ranch homes often lack proper slab drainage. That combination creates failure modes you can actually see and check yourself before you call:

- Rotted bottom panels. In Panther Lake and East Hill, original 1960s wood doors often have a soft or swollen bottom section where rain runoff pools at the threshold. That’s a failure mode far less common in drier suburbs like Auburn or Federal Way. If a screwdriver pushes easily into the panel, the wood has taken on water.
- Tired torsion springs on heavy doors. Custom and oversized doors on acreage properties carry more mass than a standard single-car model, and springs rated for standard cycles wear out early under the extra weight. A door that feels heavy to lift by hand is asking for a high-cycle replacement.
- Corroded hinges and tracks. Year-round damp rusts steel hardware and knocks the track out of alignment, so the door binds and the opener rail flexes. Look for rust streaks and a door that rubs on one side.
- Warped wood from summer heat. Puget Sound summer heat waves now reach the 90s, and older wood doors can warp and twist. A door that no longer sits flat in the opening is past adjusting.
Pricing for Garage Door Installation in Kent, WA
A typical new door installation in Kent runs $700 to $2,200, depending on the door’s size, material, and whether the track and hardware need replacing too. Custom and oversized doors on the heavier end of that range cost more because of the material and the high-cycle spring the work requires. The written estimate you get after we measure is the final number; the range below is a starting point, not the invoice. We quote and agree the price with you before any work starts.
| Work item | Typical estimated range in Kent |
|---|---|
| New Door Installation | $700 – $2,200 |
| Opener Installation | $250 – $550 |
| Spring Repair (per spring) | $180 – $340 |
A matched pair of springs is usually replaced together, so a pair costs about twice the single-spring range. Estimates are free. Call (866) 937-7471 to book a measure and get your written price.
We Also Serve Cities Near Kent
We handle installations in Kent and the communities around it, including Covington, Des Moines, Federal Way, and Auburn. The home styles shift a little from town to town, but the job is the same: measure right, order right, install right. If you’re just outside Kent, call and we’ll tell you what a measure looks like for your property.
Serving Kent, WA – Our Local Coverage Area
We serve Kent and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Garage Door Installation in Kent
They rot because the Green River Valley traps damp air and the older ranch homes often lack proper slab drainage, so rain runoff pools at the threshold and keeps the bottom section wet. Add year-round damp and long wet springs, and the bottom wood swells, softens, and eventually rots. Drier suburbs like Auburn or Federal Way don’t get the same pooling. Call (866) 937-7471 for a free evaluation of whether the bottom panel can be saved.
A high-cycle torsion spring rated for the door’s actual weight is the right choice for a heavy custom or oversized door. Springs rated for standard cycles on a heavier door wear out prematurely, so the extra load shortens their life. We set the spring to the door’s real mass, not a generic rating. Call (866) 937-7471 and we’ll measure the door and quote the correct spring.
The tell is how the door behaves with the opener disconnected. If the door is still heavy or binds when you lift it by hand, it’s a spring or track problem, not the opener. If it lifts freely by hand but the motor strains or reverses, the opener is the suspect. A quick hand test tells you which one to call about, then call (866) 937-7471 for an exact diagnosis and quote.
Often yes, if the rest of the door is sound and the section can be matched. On Panther Lake and East Hill homes with original wood doors, the bottom section takes the rain, so replacing it is usually what’s needed to get the door moving again. We check the hinges, springs, and track first so the new section sits right. Call (866) 937-7471 and we’ll tell you over the phone whether a section replacement makes sense.
The right R-value depends on whether your garage is heated or attached to living space, so it’s best to ask your installer to match it to your setup. For an attached, unheated garage in Kent, a door with some insulation helps on cold valley mornings, but the bigger wins here are moisture resistance and a heavy-duty spring. We’ll help you weigh the options when we measure. Call (866) 937-7471 for a free estimate.
If your door is rotted, your opener is straining, or you’re ready to install a heavier-duty door built for how you use your garage, call (866) 937-7471 for a free estimate. We’ll measure, quote it in writing, and get it done right the first time.
Written by the team at South Hill Garage Door Repair.