Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Cost in Kent?
Garage door repair in Kent typically costs between $150 and $600, depending on the broken part. The most common call we get is a snapped spring, and that repair usually runs $180 to $340 for a single spring. A full new door installation is a bigger project and generally lands between $700 and $2,200. Those are typical ranges for the Kent market in 2026; the written estimate you get after we look at your door sets the final price.
We work on every major brand you’ll find on a Kent street: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. That means we can usually diagnose the problem on the first visit instead of guessing and ordering the wrong part. Same-day and emergency service is a routine part of what we do, not an add-on. Call (866) 937-7471 and we’ll get a free estimate on the books.
Key takeaways
- Most repairs in Kent fall between $150 and $600.
- Spring repair is $180 to $340 for one spring; a matched pair usually gets replaced together, so a pair costs roughly double that.
- Opener repair runs $120 to $320. Replacing an old opener costs $250 to $550.
- A new door installation is $700 to $2,200, with door material and size driving most of the spread.
- Free estimates and same-day service mean you don’t have to guess at a number before you decide.
If you’re not sure which repair you need, start with our South Hill Garage Door Repair page, then call us and describe what the door is doing. A door that won’t open usually comes down to a handful of parts, and we can walk you through the likely cost over the phone before anyone comes out.
Garage Door Cost Breakdown (2026)
Here’s how the numbers break down by job type. Treat these as typical estimates for Kent, not a locked-in quote. Every door is different, and the written estimate is what counts.
| Job | Typical range |
|---|---|
| Garage door repair (general) | $150 – $600 |
| Spring repair (one spring) | $180 – $340 |
| Cable repair | $130 – $250 |
| Opener repair | $120 – $320 |
| Opener installation | $250 – $550 |
| Panel replacement | $250 – $500 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| New door installation | $700 – $2,200 |
The new door installation line has the widest spread because the door itself is most of the cost. A basic single-car steel door sits near the bottom of that range; a larger, insulated, or more finished door pushes toward the top. The spring repair figure is for one spring. Most doors use a matched pair, and they’re almost always replaced together so the door stays balanced, which puts a pair at about twice that range.
A few things move a repair up or down within its range. A torsion spring setup on a heavier door takes more work than a lighter extension-spring door. An opener that’s failed because of a stripped gear is cheaper to fix than one with a dead control board. And a door that’s been off its track for a while can bend panels or stretch cables, which turns a small fix into a two-part job. We give you the number before we start, so there are no surprises when the door’s back up and running.
What Affects Garage Door Pricing in Kent
Kent has its own mix of housing and weather, and both show up in what a job costs. Here are the factors we see most often around here.
- Door type and weight. A single-car panel door and a double-car insulated door don’t carry the same springs. Heavier doors need heavier-gauge springs, which cost more than the lighter ones on older doors.
- Spring type. Torsion springs, mounted on the shaft above the door, generally cost more to replace than extension springs along the sides. Most newer doors use torsion, so that’s what we see on a lot of Kent homes.
- Brand and parts availability. This is where being familiar with eight major brands helps. Knowing how a LiftMaster or a Genie opener is put together, or how a Clopay or Amarr door is assembled, means we diagnose faster and source the correct part the first time instead of ordering something that doesn’t fit.
- How long the problem has gone on. A cable that’s just started to fray is a quick, lower-cost fix. A door that’s been run on a bad cable for months can bend tracks and wear rollers, and the repair grows with it.
- Weather and moisture. Kent’s wet months are hard on steel doors and on the wood and hardware around a garage opening. Rusted hinges, stiff rollers, and swollen panels turn up more here than in drier parts of the state. The good news is that catching them early keeps a repair in the lower part of the range.
- Whether it’s an emergency. A door that won’t close leaves your home open, so we treat it as urgent and get someone out the same day where we can. Emergency service is core to what we do, not an upsell.
Between the East Hill, the West Hill, and the neighborhoods down toward the valley, you’ll find everything from older single-car doors to newer two-car insulated setups. The variation in door type across Kent is a big reason prices land where they do.
Which repairs are worth doing, and which mean it’s time for a new door?
Repair the door when the panels, tracks, and frame are still sound and only a part has failed. Replace the door when the panels are bent or rusted through, the structure is sagging, or repeated repairs are adding up to a large share of what a new door would cost. Repair nearly always wins on cost when the door itself is in good shape.
Springs, cables, openers, rollers, and tracks are all wear items. Replacing them keeps a sound door working for years. But once a door has been damaged structurally, or it’s an older model where parts are getting hard to find, a replacement is the better spend. Our technicians have up to 8 years of experience, and part of their job is telling you honestly which side of that line your door is on. We aren’t locked into one brand, so we’ll never push a replacement just because a repair is a little more involved.
When a repair does make sense, we handle it as a single call from opener to full door. You don’t have to track down a spring specialist, then an opener tech, then an installer. Same company, one estimate, and your routine back.
How to Save on Garage Door Costs in Kent
A few habits keep a garage door repair in the lower part of the range, and they cost nothing.
- Fix the small thing before it grows. A noisy roller or a stiff hinge is a cheap fix now and a bent track later. Catch it while the repair is still small.
- Listen to the door. A bang from the spring area, a door that runs unevenly, or an opener that strains are all early signs. Getting them looked at before the door fails usually means a lower bill and no scramble.
- Keep the hardware moving. A little lubrication on the hinges, rollers, and springs keeps them from rusting up in the wet months. That’s routine upkeep, not a repair bill.
- Ask for a written estimate. Every job we quote comes with a fixed estimate before work starts, so you know the number up front. Estimates are free, and calling (866) 937-7471 to talk through the problem first costs you nothing.
- Weigh repair against replacement with real numbers. If a repair would cost a big share of a new door’s price and the door is already worn, ask us to price both. We’ll show you the side-by-side rather than steering you toward one answer.
One caution before you consider a DIY fix: springs and cables are under heavy tension and can cause serious injury if they let go. This is the repair to leave to a trained professional. We’d rather quote you a fair price on a safe spring repair than have you risk a hand.
FAQs – Garage Door Cost
How much does garage door repair cost in Kent?
Most garage door repairs in Kent cost between $150 and $600. The exact figure depends on the part that failed and how long it’s been that way. Call (866) 937-7471 for a free, no-pressure estimate, and we’ll give you a real number.
How much does a garage door spring repair cost?
Spring repair runs $180 to $340 for one spring. Because doors usually use a matched pair that gets replaced together, a pair lands at about twice that range. Springs are under high tension, so this is a job for a trained technician. Call (866) 937-7471 and we’ll confirm pricing for your door.
How much does a new garage door installation cost in Kent?
A new garage door installation typically costs $700 to $2,200. The door’s size, material, and insulation account for most of the spread, with installation a smaller share. We’ll price out the door and the install together in one estimate, so call (866) 937-7471 to get started.
Is it cheaper to repair or replace a garage door?
Repair is almost always cheaper when the door itself is sound and only a part has failed. Replacement makes more financial sense once panels are structurally damaged or repeated repairs start adding up toward the cost of a new door. We’ll give you both numbers so you can decide. Call (866) 937-7471 for a free estimate.
Can you come today if my garage door is stuck?
Yes, in most cases same-day service is available for a door that’s stuck or won’t close. A door that won’t close leaves your home exposed, so we treat it as urgent. Call (866) 937-7471 and we’ll get a technician out and give you an upfront price on the spot.
If your door is stuck, misbehaving, or you’re planning a replacement, we’re ready to help. We work on all the major brands, handle everything from opener repair to a full door, and quote a clear, fixed price before any work begins. Call (866) 937-7471 for a free estimate in Kent today.
Pricing reflects the Kent market as of 2026. South Hill Garage Door Repair offers free estimates – call (866) 937-7471.
Written by the team at South Hill Garage Door Repair.
What Our Customers Say
"Door installed in about four hours, old one hauled away, and he stayed to program both cars and the wall panel before he left."
- Christine Nguyen"Logic board on a 15 year old opener. He was upfront that a new opener would cost less than the board plus labor, and he wasn't wrong. No pressure either way."
- Shane Padgett"Fixed the spring properly and the door works fine. He did leave the old spring and some hardware by the side of the house, and I had to text to ask about hauling it off. They came back for it, just took a couple of days."
- Javier Guzman